Patient Monitoring AM-PMA10 is a high-resolution multiple-parameter monitoring system. Designed with a TFT colour display touchscreen for monitoring all vital parameters. featured with 5 standard parameters ECG, NIBP, RESP, and temp employed for monitoring and during transport. It is improved with real-time S-T segment for analysis and pacemaker detection for heart surveillance.
| Screen Display | 12" color TFT LCD |
| Screen Resolution | 800×600 pixels |
| Waveforms | Up to 7 |
| ECG Input | 3/5 wire ECG cable |
| Lead Section | I II III aVR, aVL, aVF, V |
| Gain Selection | *0.25, *0.5, *1, *1.2 |
| Sweep Speed | 6.25mm/s, 12.5mm/s, 25mm/s, 50mm/s |
| Heart Rate Range | 15 to 30bpm |
| Calibration | ±1mv |
| ECG Accuracy | ±1bpm or ±1% (select the bigger data) |
| NIBP Test method | Oscillometer |
| Philosophy | Adult, Pediatric and Neonate |
| NIBP Measurement Type | Systolic Diastolic Mean |
| Measurement Parameter | Automatic, Continuous measurement |
| Measurement method Manual | mmHg or ±2% |
| SPO₂ Display Type | Waveform, Data |
| SPO₂ Measurement range | 0 to 100% |
| SPO₂ Accuracy | ±3% (between 70%-100%) |
| Pulse Rate Range | 20 to 300bpm |
| Pulse Rate Accuracy | ±1bpm or ±2% (select the bigger data) |
| Pulse Rate Resolution | 1bpm |
| Rectal & Surface channels | 2 channels |
| Rectal & Surface Measurement range | 0℃ to 50℃ |
| Rectal & Surface Accuracy | ±0.2℃ |
| Rectal & Surface Display | T1, T2 |
| Unit | ºC/ºF selection |
| Refresh cycle | 1s to 2s |
| Impedance & Nasal Tube Measurement type | 0 to 150 rpm |
| Impedance & Nasal Tube Accuracy | ±1bm or ±5%, select the bigger data |
| Impedance & Nasal Tube Resolution | 1 rpm |
| EtCO₂ Measurement type | Side stream |
| EtCO₂ Measurement range | 0 to 10.0%; 0 to 76mmHg |
| EtCO₂ Accuracy | ＜5.0%, ±0.28kPa; ±2mmHg/ ＞5.0%, ±10% |
| 2-IBP Measurement range | 10 to 300mmHg |
| 2-IBP channels | 1 or 2 channels |
| 2-IBP Accuracy | ±1mmHg or ±2%, select bigger data |
| 2-IBP Pressure tag | ART, CVT, RVP, LAP, RAP, PAP, ICP, LVP |
| 12 leads ECG Input | 3/5/10 wires ECG cable |
| 12 leads ECG Lead section | I, II, III aVR, aVL, aVF, V(V1-V6) |
| 12 leads ECG Heart rate range | 15 to 380 bpm |
| 12 leads ECG Calibration | ±1mv |
Connect with Our Specialists
Patient Monitors are designed for modern healthcare environments, this state-of-the-art monitor provides real-time tracking of vital signs including heart rate, blood pressure, oxygen saturation, respiratory rate, and temperature—all displayed on a high-resolution touchscreen interface for easy, intuitive navigation. Our devices are equipped with cutting-edge sensors for precise, consistent readings. Whether in an ICU, emergency room, or outpatient clinic, the Patient Monitor empowers healthcare professionals to make informed decisions.
